Email this article INVESTIGATION OF SCHEMES FOR HYDRODYNAMIC CLEANING OF UNITS OF HYDRO-FUEL SYSTEMS
- Authors: Reshetov V.M.1
-
Affiliations:
- Samara National Research University (Samara University)
- Issue: Vol 8, No 2 (2022): 12.09.2022
- Pages: 20-26
- Section: Articles
- Published: 12.09.2022
- URL: https://dynvibro.ru/dynvibro/article/view/11035
- DOI: https://doi.org/10.18287/2409-4579-2022-8-2-20-26
- ID: 11035
Cite item
Full Text
Abstract
The paper considers the structure of stands for hydrodynamic cleaning of units in order to ensure optimal cleaning parameters and protection of the pumping station, the features of parallel and series connection of a source of fluid oscillations when creating a pulsating pressure and flow in the cavity of the cleaned hydraulic unit. When calculating the modes of hydrodynamic cleaning of the cavities of the unit in resonant modes, electrodynamic analogies are used. The conducted experimental studies have confirmed the high efficiency of the purification process.
About the authors
V. M. Reshetov
Samara National Research University (Samara University)
Author for correspondence.
Email: vmresh@rambler.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation
References
- GOST 17216-2001. Industrial cleanliness. Liquid purity classes. / Introduction 2003-01-01. - Moscow: Standartinform Publ, 8 p.
- NAS 1638 “Cleanliness requirements of parts used in Hydraulic systems,” Aerospace Industries of America, Washington D.C., USA, 2001.
- AS4059 “Aerospace fluid power - cleanliness classification for hydraulic fluids,” SAE, Warrendale, Pa., USA, April 2001.
- Belyanin P.N. Promyshlennaya chistota mashin [Industrial cleanliness of machines] / Belyanin P.N., Danilov V.M.. – Moscow: Mashinostroenie Publ, 1982. 224 p.
- Timirkeev R.G. Promyshlennaya chistota i tonkaya fil'traciya rabochih zhidkostej letatel'nyh apparatov [Industrial purity and fine filtration of aircraft fluids] / Timirkeev R.G., Sapozhnikov V.M. – Moscow: Mashinostroenie Publ, 1986. 152 p.
- Sanchugov, V.I. Snizhenie zagryaznyonnosti agregatov gidroprivoda mashin i mekhanizmov na osnove gidrodinamicheskoj ochistki [Reducing the contamination of hydraulic drive units of machines and mechanisms based on hydrodynamic cleaning] / Sanchugov V.I., Reshetov V.M. // Izvestia of Samara Scientific Center of the Russian Academy of Sciences, t. 13, № 6, 2011 – P. 264-268.
- Sanchugov, V.I., Reshetov V.M. Special features of internal surfaces cleaning processes control in pipelines and units of hydro-fuel systems - Procedia Engineering, 2017. Vol. 176. P. 618-627
- Sviridov A.N. Ocenka effektivnosti promyvki vnutrennih polostej izdelij pul'siruyushchim potokom [Evaluation of the efficiency of washing the internal cavities of products with a pulsating flow] / Sviridov A.N. // Vestnik mashinostroeniya. – 1981. –№10. – p.33-35.
- GOST 31303-2006. CHistota promyshlennaya. Metod ochistki gidrodinamicheskij gazovyh i zhidkostnyh sis-tem mashin i mekhanizmov ot zagryaznitelej [Industrial cleanliness. Hydrodynamic cleaning method of gas and liquid systems of machines and mechanisms from pollutants]/ Introduction 2008-03-01. – Moscow: Standartinform Publ, 2007. - 18 p.
- Sanchugov V.I. Tekhnologicheskie osnovy dinamicheskih ispytanij i otrabotki gidrosistem i agregatov : uchebnoe posobie [Technological foundations of dynamic testing and testing of hydraulic systems and units: textbook] / Sanchugov V.I – Samara: Samara Scientific Center of the Russian Academy of Sciences Publ, 2003. – 96 p.
- Shorin, V.P. Ustranenie kolebanij v aviacionnyh truboprovodah [Elimination of vibrations in aviation pipelines] / Shorin, V.P. – Moscow: Mashinostroenie Publ, 1980. - 156 p.
- Glikman B.F. Avtomaticheskoe regulirovanie zhidkostnyh raketnyh dvigatelej [Automatic regulation of liquid rocket engines] / Glikman B.F. – Moscow: Mashinostroenie Publ, 1989. - 296 p.
- Atabekov G.I. Osnovy teorii cepej [Fundamentals of circuit theory] / Atabekov G.I. – St. Petersburg: «Lan'» Publ, 2009, 432 p.
Supplementary files
