BENCH COMPLEX FOR SYNCHRONOUS MONITORING OF NOISE VIBRATION AND FUNCTIONAL CHARACTERISTICS OF ELECTROHYDRAULIC EQUIPMENT

Cover Page

Cite item

Full Text

Abstract

When creating specialized pumping test stands for hydraulic devices to check their vibration and noise characteristics, the main problem is the choice of pump type. This, in the first place, is connected with the different principle of operation of pumping units and the influence that the working organ exerts on the flow of liquid.

Currently, there is a wide range of pumps, differing in design, with different functional capabilities, supplying the working medium both at the nominal mode, and allowing to regulate supply and pressure parameters in a wide range. They are divided into two main groups: dynamic and voluminous. The choice of the pump for the needs of creating a stand determines its own vibra-tion characteristics of the entire system being created.

Proceeding from the made choice, it is necessary to determine the own charac-teristics of the created stand and, if necessary, to develop and apply a number of additional tools that allow improving the vibrational and noise characteristics of the stand being created.

The article presents the procedure for creating such a stand and describes the solutions that allow to combat the influence of the pump unit during the testing of hydraulics. The work was carried out using two types of pumps: axial-piston and centrifugal pumps. The following solutions were applied in the work: resonators, vibra-holding arrays, expansion tanks and flexible interchanges. The selection of the optimal combination and the correct calculation of the parameters of these means can significantly improve the intrinsic characteristics of the test stand being created and reduce own noise in the part of vibration and hydrodynamic noise.

About the authors

Erlen Grigorievich Berestovitsky

Concern Avrora Scientific and Production Association JSC

Email: berest40@mail.ru

doctor of technical sciences, leading researcher

Russian Federation

Yury Alexeevich Gladilin

Concern Avrora Scientific and Production Association JSC

Email: gladil_01@mail.ru

andidate of technical science, assistant professor, head of laboratory – chief acoustics

Russian Federation

Andrey Anatolievich Frantov

Concern Avrora Scientific and Production Association JSC

Author for correspondence.
Email: aafrantov@gmail.com

candidate of technical science, senior researcher – deputy chief acoustican

Russian Federation

References

  1. Budnichenko M.A., Nekrasov V.A. Development methodology of factory vibroacoustic tests for industrially pro-duced ship equipment // Transaction of the Krylov State Research Center. 2018. Issue. 2 (384). – P. 121-130 (in Russian).
  2. Official website of the manufacturer Brüel & Kjær, Denmark / Electronic resource / Access mode https://www.bksv.com/ru-RU/Applications/
  3. Official website of the manufacturer ZETLab, Russia Federation / Electronic resource / Access mode https://zetlab.com/produkciya/
  4. Berestovitsky, E.G., Obukhovskiy S.A., (2006) Problems of creating a specialized stand for vibro-acoustic testing of instruments and control systems. Sudostroyeniye , no.4, pp. 42 – 45. (in Russian).
  5. Romashov N.N., (2016) Dynamic resistance simulator. Management system and information processing: scientific and technical collection, no. 35. pp. 89-99. (in Russian).
  6. Gladilin, Y.A., Romashov N.N., Frantov, A.A., (2012) Study of the effectiveness of the application of certain methods to reduce the vibration activity of hydraulic devices. Technical and technological problems of service, №4 (22). 2012. – P. 10-13. (in Russian).

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2020 Эрлен Григорьевич Берестовицкий, Юрий Алексеевич Гладилин, Андрей Анатольевич Франтов

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal of Dynamics and Vibroacoustics

ISSN 2409-4579 (Online)

Publisher and Founder: Samara National Research University, 34, Moskovskoye shosse, Samara, 443086, Russian Federation.

Extract from the register of registered media

Editor-in-chief:  Academician of the RAS
E. V. Shakhmatov 

4 issues per year.

Free price

Editorial address: room 324, 43, Gaya street, Samara, 443086

Address for correspondence: 34, Moskovskoye shosse, Samara, 443086, Russian Federation, Samara National Research University (room 324, building 14)

Phone: 8 (846) 267 47 66

e-mail: dynvibro@ssau.ru

www: https://dynvibro.ru

© Samara University

 

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies