Email this article Influence of geometric factors on cyclic durability of rotor main parts of the hot section of aircraft engines. Validation using lumen control results
- Authors: Selishchev P.A.1, Zelenkevich A.D.1
-
Affiliations:
- PJSC «UEC-Kuznetsov»
- Issue: Vol 10, No 2 (2024): 7.10.2024
- Pages: 35-48
- Section: Articles
- Published: 07.10.2024
- URL: https://dynvibro.ru/dynvibro/article/view/27850
- DOI: https://doi.org/10.18287/2409-4579-2024-10-2-35-48
- ID: 27850
Cite item
Full Text
Abstract
A study was conducted of the influence of some geometric factors on such parameters as the position of dangerous points determining the cyclic durability of a part, and the values of cyclic durability at these points. Based on the results of the validation carried out using the results of non-destructive testing and fractographic studies of opened cracks in the main part with operational defects, the adequacy - the degree of compliance with the research results - of the calculation models used to determine the cyclic durability was established. The work was carried out as part of the task of determining the resource indicators of the main part, taking into account the presence of an initial defect.
About the authors
Pavel A. Selishchev
PJSC «UEC-Kuznetsov»
Author for correspondence.
Email: pa.selischev@uec-kuznetsov.ru
Design Engineer
Russian Federation, Samara, Russian FederationAleksandr D. Zelenkevich
PJSC «UEC-Kuznetsov»
Email: ad.zelenkevich@uec-kuznetsov.ru
Design Engineer
Russian Federation, Samara, Russian FederationReferences
- Polozhenie ob ustanovlenii i uvelichenii resursov i srokov sluzhby gazoturbinnykh dvigateley gra-zhdanskoy aviatsii, ikh agregatov i komplektuyushchikh izdeliy [Regulations on establishing and increasing the resources and service life of civil aviation gas turbine engines, their units and components] (2005), CIAM, Moscow. (In Russian).
- Normy prochnosti aviatsionnykh gazoturbinnykh dvigateley grazhdanskoy aviatsii [Strength standards for aviation gas turbine engines], 2005, CIAM, Moscow. (In Russian).
- Anurov, Yu. M. and Fedorchenko, D. G. (2004), Osnovy obespecheniya prochnostnoj nadyozhnosti aviacionnyh dvigatelej i silovyh ustanovok [Fundamentals of ensuring the strength reliability of aircraft engines and power plants], SPbGTU Publ., Saint Petersburg. (In Russian).
- Serensen, S. V., Shneyderovich, R. Sh. and Gusenkov, A. P. (1975), Prochnost' pri malotsiklovom nagruzhenii. Osnovy metodov rascheta i ispytaniy [Strength under low-cycle loading. Fundamentals of calculation and test methods], Mashinostroenie Publ., Moscow. (In Russian).
- Eliseev, Yu. S., Krymov, V. V., Malinovskiy, K. A. and Popov, V. G. (2002), Tekhnologiya ekspluatatsii, diagnostiki i remonta gazoturbinnykh dvigateley [Technology of operation, diagnostics and repair of gas turbine engines], Graduate School, Moscow. (In Russian).
- Aviatsionnye pravila. Normy letnoy godnosti dvigateley vozdushnykh sudov [Aviation rules, airworthiness standards for aircraft engines] (2012), MAK. (In Russian).
- Hill, R. (1956), Matematicheskaya teoriya plastichnosti [The Mathematical Theory of Plasticity], Gos. izd-vo tekhnicheskoy lit-ry [State publishing house of technical literature], Translated from English by E. I. Grigolyuk, Moscow. (In Russian).
- Prager, W. (1958), Problemy teorii plastichnosti [Problems of the theory of plasticity], Gos. izd-vo fiziko-matem. lit-ry [State publishing house of physical and mathematical literature], Translated from German by A. I. Smirnov, Moscow. (In Russian).
- Opredelenie dolgovechnosti, periodichnosti inspektsiy i naznachennogo resursa osnovnykh detaley GTD po kontseptsii bezopasnogo razvitiya defekta [Determination of durability, inspection frequency and assigned resource of the main gas turbine engine parts based on the concept of safe defect development] (2015), CIAM, Moscow. (In Russian).
- Kocherov, E. P. and Vinogradov, A. S. (2011), Raschet pokazateley nadezhnosti detaley turbiny aviatsionnogo GTD [Calculation of reliability indicators for aircraft gas turbine engine parts], Samara University Publ., Samara. (In Russian).
- Menson, S. S. (1974), Temperaturnye napryazheniya i malotsiklovaya ustalost' [Thermal stresses and low-cycle fatigue], Mashinostroenie Publ., Moscow. (In Russian).
Supplementary files
