DESIGN OF A LOW-NOISE THROTTLE SECTION FOR SHUT-OFF CONTROL VALVES


Cite item

Full Text

Abstract

The article describes the main source of hydrodynamic noise (HDN) in shut-off and control valves and the mechanism of the occurrence of acoustic energy. The main geometric parameters of the throttle section with a cylindrical shape are considered: the shape of the channels of the throttle section, the diameter of the orifices of the channels and the distance between the channels. The stages of choosing these geometric parameters are described. Changes in these parameters significantly affects the HDN in control valves. The article presents the experimentally obtained dependences of the change in the HDN level on the relative change in the diameter of the channels of the throttle section and on the change in the relative distance between the channels in 1/3 octave frequency bands.

About the authors

A. N. Kryuchkov

Samara National Research University (Samara University)

Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation

M. A. Ermilov

Samara National Research University (Samara University)

Author for correspondence.
Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation

M. V. Balyaba

Samara National Research University (Samara University)

Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation

Е. N. Ermilova

Samara National Research University (Samara University)

Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation

A. N. Vidyaskina

Samara National Research University (Samara University)

Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation

References

  1. IEC 60534-8_4 Industrial Process Control Valves – Noise Considerations 2015.
  2. A.V. Ionov. Means to reduce vibration and noise on ships [Text] / A.V. Ionov. - St. Petersburg: Krylov State Research Centre, 2000. - 348 p.
  3. GOST R 50.2.038. - 2004 Ocenivanie po-greshnostej i neopredelennosti rezul'tata izme-renij [Estimation of errors and uncertainty of the result of measurements] [Text] - Introduced. 2004-10-27. - Moscow: Izdatel'stvo standartov, 2004. - 7 p.
  4. V.I. Sanchugov. Metody otrabotki agregatov i sistem aviacionnoj tekhniki [Methods for testing units and systems of aviation equipment] [Text]: doctoral dissertation: 05.07.07, 05.07.04 / V. I. Sanchugov - Samara, 1998. - 298 p.
  5. A.A. Igolkin. Snizhenie kolebanij i shuma v gidromekhanicheskih sistemah [Reduction of oscillations and noise in hydromechanical systems] [Text] / A.A. Igolkin, A.N. Kryuchkov, G.M. Makaryants and others. - Samara: Izd-vo SGAU, 2005. - 314 p.
  6. V.P. Shorin. Ustranenie kolebanij v aviacionnyh truboprovodah [Elimination of oscillations in aviation pipelines] [Text] / V.P. Shorin. – Moscow: Mashinostroenie, 1980. – 156 p.
  7. V.D. Zinevich. Porshnevye i shesterennye pnevmodvigateli gornoshahtnogo oborudovaniya [Piston and gear pneumatic motors of mining equipment] / V.D. Zinevich, L.A. Geshlin. – Moscow: Nedra, 1982. – 199 p.
  8. E.S. Arzumanov. Snizhenie shuma i vibracii v reguliruyushchih organah klapanov dlya vysokih perepadov davlenij [Noise and vibration reduction in valve control elements for high pressure drops] [Text] / E.S. Arzumanov, V.G. Skripchenko, L.N. Nisman. - Moscow: CINTI him-neftemash, 1976. – 48 p.
  9. Globe/angle cage-guided control valves [Text] / Kentintrol brochure. – 2019. – 18

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2022 Kryuchkov A.N., Ermilov M.A., Balyaba M.V., Ermilova Е.N., Vidyaskina A.N.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Свидетельство о регистрации СМИ, 16+

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies