DESIGN OF A LOW-NOISE THROTTLE SECTION FOR SHUT-OFF CONTROL VALVES
- Authors: Kryuchkov A.N.1, Ermilov M.A.1, Balyaba M.V.1, Ermilova Е.N.1, Vidyaskina A.N.1
-
Affiliations:
- Samara National Research University (Samara University)
- Issue: Vol 8, No 4 (2022): 15.12.2022
- Pages: 6-13
- Section: Articles
- Published: 15.12.2022
- URL: https://dynvibro.ru/dynvibro/article/view/14882
- DOI: https://doi.org/10.18287/2409-4579-2022-8-4-6-13
- ID: 14882
Cite item
Full Text
Abstract
The article describes the main source of hydrodynamic noise (HDN) in shut-off and control valves and the mechanism of the occurrence of acoustic energy. The main geometric parameters of the throttle section with a cylindrical shape are considered: the shape of the channels of the throttle section, the diameter of the orifices of the channels and the distance between the channels. The stages of choosing these geometric parameters are described. Changes in these parameters significantly affects the HDN in control valves. The article presents the experimentally obtained dependences of the change in the HDN level on the relative change in the diameter of the channels of the throttle section and on the change in the relative distance between the channels in 1/3 octave frequency bands.
About the authors
A. N. Kryuchkov
Samara National Research University (Samara University)
Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation
M. A. Ermilov
Samara National Research University (Samara University)
Author for correspondence.
Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation
M. V. Balyaba
Samara National Research University (Samara University)
Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation
Е. N. Ermilova
Samara National Research University (Samara University)
Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation
A. N. Vidyaskina
Samara National Research University (Samara University)
Email: emasamara@gmail.ru
Russian Federation, 34, Moskovskoye shosse, Samara, 443086, Russian Federation
References
- IEC 60534-8_4 Industrial Process Control Valves – Noise Considerations 2015.
- A.V. Ionov. Means to reduce vibration and noise on ships [Text] / A.V. Ionov. - St. Petersburg: Krylov State Research Centre, 2000. - 348 p.
- GOST R 50.2.038. - 2004 Ocenivanie po-greshnostej i neopredelennosti rezul'tata izme-renij [Estimation of errors and uncertainty of the result of measurements] [Text] - Introduced. 2004-10-27. - Moscow: Izdatel'stvo standartov, 2004. - 7 p.
- V.I. Sanchugov. Metody otrabotki agregatov i sistem aviacionnoj tekhniki [Methods for testing units and systems of aviation equipment] [Text]: doctoral dissertation: 05.07.07, 05.07.04 / V. I. Sanchugov - Samara, 1998. - 298 p.
- A.A. Igolkin. Snizhenie kolebanij i shuma v gidromekhanicheskih sistemah [Reduction of oscillations and noise in hydromechanical systems] [Text] / A.A. Igolkin, A.N. Kryuchkov, G.M. Makaryants and others. - Samara: Izd-vo SGAU, 2005. - 314 p.
- V.P. Shorin. Ustranenie kolebanij v aviacionnyh truboprovodah [Elimination of oscillations in aviation pipelines] [Text] / V.P. Shorin. – Moscow: Mashinostroenie, 1980. – 156 p.
- V.D. Zinevich. Porshnevye i shesterennye pnevmodvigateli gornoshahtnogo oborudovaniya [Piston and gear pneumatic motors of mining equipment] / V.D. Zinevich, L.A. Geshlin. – Moscow: Nedra, 1982. – 199 p.
- E.S. Arzumanov. Snizhenie shuma i vibracii v reguliruyushchih organah klapanov dlya vysokih perepadov davlenij [Noise and vibration reduction in valve control elements for high pressure drops] [Text] / E.S. Arzumanov, V.G. Skripchenko, L.N. Nisman. - Moscow: CINTI him-neftemash, 1976. – 48 p.
- Globe/angle cage-guided control valves [Text] / Kentintrol brochure. – 2019. – 18