Email this article RESEARCH AND OPTIMIZATION OF THE MATHEMATICAL MODEL OF THE HYDRAULIC DRIVE
- Authors: Dubova S.A.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 7, No 3 (2021)
- Pages: 35-37
- Section: Articles
- URL: https://dynvibro.ru/dynvibro/article/view/10236
- DOI: https://doi.org/10.18287/2409-4579-2021-7-3-35-37
- ID: 10236
Cite item
Full Text
Abstract
The objective of this project is to develop a simulator based on a real 1D hydraulic slider. Once a suitable simulator based on a mathematical drive model has been prepared, you need to check the simulator output for different types of inputs. The next step is to use the same input in the current system and then compare the current outputs of the system and the simulator together.
About the authors
S. A. Dubova
Samara National Research University
Author for correspondence.
Email: simonau@mail.com
Russian Federation, 34, Moskovskoe shosse, Samara, 443086, Russian Federation
References
- REN21 (2017), Renewables 2017 Global Status Report, ISBN 978-3-9818107-6-9, Paris, 302 p.
- REN21 (2015), Renewables 2015 Global Status Report, ISBN 978-3-9815934-6-4, Paris, 251 p.
- Makarov, A. (2019), Forecast of energy development in the world and in Russia.[Prognoz razvitia energetiki v mire I Rossii], ISBN 978-5-91438-028-8, ERIRAS, Moscow, 210 p.
- Liermann, M. (2015), “Energy Efficiency of Pneumatic Power Take-Off for Wave Energy Converter”, International Journal of Marine Energy, October 2015, pp.1-31.
Supplementary files
