Email this article Vibroacoustic modeling of a compressor piping system
- Authors: Mironova T.B.1, Rekadze P.D.1, Prokof'ev A.B.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 10, No 1 (2024): 6.05.2024
- Pages: 68-77
- Section: Articles
- Published: 06.05.2024
- URL: https://dynvibro.ru/dynvibro/article/view/27434
- DOI: https://doi.org/10.18287/2409-4579-2024-10-1-68-77
- ID: 27434
Cite item
Full Text
Abstract
The paper presents a finite element model of the compressor piping, developed in the Ansys software package using the APDL language. The finite element model was developed taking into account the real conditions of fastening pipeline sections in the form of installed supports. The calculation of the pipeline system began with the calculation of flow pulsations generated by the compressor, which were converted into pressure pulsations. The calculation results in the form of pipe vibration amplitude were obtained for each piping pipeline. The results obtained were compared with the vibration parameters recommended by GOST 32569-2013.
Keywords
About the authors
Tat'yana B. Mironova
Samara National Research University
Author for correspondence.
Email: mironova.tb@ssau.ru
Candidate of Science (Engineering), Associate Professor of the Department of Automatic Systems of Power Plants named after V. P. Shorin
Russian Federation, SamaraPavel D. Rekadze
Samara National Research University
Email: rekadze.pd@ssau.ru
Candidate of Science (Engineering), Design Engineer of NII-201 (Institute of Acoustics of Machines) of Institute of Engine and Power Plant Engineering
Russian Federation, SamaraAndrey B. Prokof'ev
Samara National Research University
Email: prok@ssau.ru
Doctor of Technical Sciences, Associate Professor, Head of the Department of Theory of Aircraft Engines named after V. P. Lukachev
Russian Federation, SamaraReferences
- Bermúdez A., Shabani M. (2021), "Modelling compressors, resistors and valves in finite element simulation of gas transmission networks", Applied Mathematical Modelling, vol. 89, part 2, pp. 1316–1340.
- Li, F., Wang, D.; Liu, L. and Zhao, J. (2010), "Analysis and reconstruction of super-high pressure compressor pipeline vibration", International Conference on Advanced Technology of Design and Manufacture (ATDM 2010) , Beijing, China, pp. 153-156.
- Hicham, F., Hadjoui, A. and Nabil, O. (2021), "Fluid-structure interactions of internal pressure pipeline using the hierarchical finite element method", Advances in Mechanical Engineering, September 2021, vol. 13, issue 9.
- Wu, J., Li, C., Zheng, S. and Gao, J. (2019), "Study on Fluid-Structure Coupling Vibration of Compressor Pipeline", Shock and Vibration, Hindawi, vol. 2019, pp. 1-12.
- Lavooij, C. S. W. and Tusseling, A. S. (1991), "Fluid-structure interaction in liquid-filled piping systems", Journal of Fluids and Structures, September 1991, vol. 5, issue 5, pp. 573-595.
- Federal Agency for Technical Regulation and Metrology (2015), GOST 32569-2013 : Truboprovody tekhnologicheskie stal'nye. Trebovaniya k ustroystvu i ekspluatatsii na vzryvopozharoopasnykh i khimicheski opasnykh proizvodstvakh [Industrial steel pipe-lines. Requirements for design and operation in explosive and chemically dangerous industries].
- Landau, L. D. and Lifshitz, E. M. (1987), Fluid mechanics, by L.D. Landau and E.M. Lifshitz ; translated from the Russian by J. B. Sykes and W. H. Reid, Pergamon Press, London.
- Shorin, V. P. (1980), Vibration damping in the aviation pipelines, Mashinostroenie, Мoscow:, 156 p. (In Russian).
- Operating instructions IM200205en for process compressor. Burckhardt Compression AG.
Supplementary files
